Solar Powered Ultrasonic Animal Repeller Motion Sensor Animal Chaser
1.5 Operation Modes
Details:
*Features*:
*5 Operation Modes*:Simply turn the 'Frequency' knob to switch five different modes. Mode1:13.5kHz- 20kHz; ultrasonic speakers working; drives mice; rats; foxes; etc.. Mode2:15.6KHz- 25kHz; ultrasonic speakers working; drives cats; raccoons; badgers; etc.. Mode3:25kHz- 35kHz; ultrasonic speakers working; drives bats; birds; rodents; etc.. Mode4:Strong LED flashes; drives raccoon; boar; marten; etc.. Mode5:Wave alert with 13.5kHz-41kHz and strong flashing lights; drives all animals above away.
*Solar Charged & USB Powered*:With solar panel on its top and charging port; the animal control can be fully charged after 24 hours of sunlight or 6 hours of USB charging. 4Pcs 800MA Ni-MH batteries(Total 3200mAh) ensures about 7-10 days working time. Note:The batteries can NOT be replaced when they are worn out.
*IP44 Waterproof & Large Coverage*:IP44 Waterproof design makes it keep working safely in rainy; snowy or freezing weather conditions no matter in the yards; patios; garages; attics; porches; boats; gardens; farms; ponds or when you are camping. It can emit sonic wave to drive animal effectively with up to 1615sq.ft coverage.
*Humanized Animal Repeller*:This Animal Repeller uses 13.5-41kHz ultrasonic sound; LED flashing light and sounds to drives animals; with no chemicals; no harm to human body; your pets and other animals.
*Two Installation Methods*:You can simply insert the animal repeller into the ground with a removable pole(included) or hang up where there is plenty of sun light with a portable hook on the top. Note:Please leave the pole about 4-5in or more above the ground. Don't hammer directly on the device but dig a hole to mount it.
Note:
1. It happens that human can hear part of its range. So put the device as far as possible from human life place. Do not install the device in a children and baby playing ground area.
2.Do not cover up the PIR sensor or solar panel.
3. To clean the device; use damp- soft and mild soap with water. Do not use harsh chemicals or abrasive cleaning agents that may damage the device
4. The length of the work depends on the frequency of the trigger. If the trigger is too frequent; the battery will be low and the latter will not work.
5. We recommend USB charging time in 5-6 hours or you can wait until the charging indicator is off.
6. When a human body or an animal moves in the sensing area; the corresponding gear can be triggered to work; a sound wave or light wave alarm will be issued; and the red light will be always on.
7. When the battery voltage is low; the alarm will not be turned on and the red light will flash to remind charging.
8. When the light is sufficient; the unit will turn on a blue light to recharge the battery.
*Specifications*:
Product Type: Animal Chaser
Color: Green
Material: ABS
Solar Panel: 5V/50mAh
Battery: 4Pcs 800MA Ni-MH
Power By: Sunlight Power/USB Cable
Waterproof Rate: IP44
Sensing Distance: 3- 8M/9.84- 26.25ft
Sensing Angle: 110°
Frequency: 13.5-41kHz
Charge By Sunlight: About 24Hrs
Charge By USB Cable: About 6Hrs
Work Time: 7-10 Days
Working Area: 150m²/1615sq.ft
USB Cable Length: About 60cm/23.62in
Total Pole Length (Assembled): 33.5cm/13.19in
Pole Diameter: 2.3cm/0.91in
Item Size: 40x11x11cm/15.75x4.33x4.33in
Item Weight: 376g/0.83lbs
*Package Lists*:
1 x Animal Chaser
3 x Poles
1 x USB Cable
1 x User Manual
